Changelog
What's new.
Every software update at a glance – choose your display, tap a version for details. Updates install directly on the device via Wi-Fi.
4.1.4
Latest
The biggest update so far: petrol engine support, pointer sweep, instrument cluster self test and many refinements.
New
- Petrol engines: 9 petrol engines are now supported alongside all diesels (N20 · N43 · N46 · N51 · N52 · N53 · N54 · N55 · S65) – with engine-specific live values such as rail pressure, lambda, ignition angle, manifold pressure and throttle.
- Pointer sweep: On start-up, the cluster needles can sweep across the full scale – like modern factory instruments. Matched to 260 and 280 speedo scales, fine-tunable right on the display.
- Cluster self test: Start the original BMW instrument test straight from the display – no diagnostic tool needed.
- Gearbox oil temperature as a selectable value for automatic transmissions (optional).
- Peak marker: Bar gauges show a subtle marker for the highest value – it lights up on a new peak and slowly follows the live value.
- Automatic brightness with separate day and night levels – the display follows your dashboard lighting.
- Diagnostics log: The device keeps a log of restarts and system events – in a support case, a photo of this page is all we need.
Improved
- Larger, bolder typography across all menus – much easier to read while driving.
- Complete translation into 6 languages with instant language switching.
- Particulate filter page is fully live – all values refresh automatically.
- Double-tap to change values now works reliably across the whole gauge area; switches and menus respond more precisely.
- Maximum values are now stored permanently until you reset them – they survive ignition off.
- Redesigned Wi-Fi update page with automatic update check.
Fixed
- Display now always starts reliably after software updates and restarts.
- Soot, ash and air-mass bars now use the full gauge range.
- Maximum values are shown with decimals (e.g. battery 12.6 V instead of 12 V).
- Power/torque correction now stays active across restarts.
4.1.3
Latest
Refinements for the pointer sweep and cluster functions.
Improved
- Pointer sweep now supports 260 and 280 speedo scales with separate, per-car tuning profiles.
- Rev counter end value adjustable – needles return exactly to zero on every cluster.
- Smoother, better synchronised needle movement during the sweep.
4.1.1
Fixed
- Wi-Fi update: phones and PCs now connect reliably to the display's hotspot.
4.1.0
Major feature release.
New
- Support for 9 petrol engines with engine-specific live values (rail pressure, lambda, ignition angle, throttle, injection time and more).
- Two-step engine selection: petrol/diesel first, then your engine.
- Page turning via cruise control stalk (optional, teach-in on the display).
Improved
- Dark boot: no more flash of light when powering up – the display fades in with the boot screen.
- All settings are saved instantly and survive power loss.
How do I update?
Open Settings → System → Update on your display, connect it to your Wi-Fi and the device checks for new versions automatically. The step-by-step guide is on the guides page. Found a bug? Report it – every report makes the software better.